sensor

Thin film RTD element is designed for limit space, installed various surface forms for accurate point sensing and fast response. The structure can be made of platinum wire loop between the layers and chip, sensing body is flexible. This model is conform to IEC 60751, Class AA, A and B tolerance when ordered with a platinum element.

Glass wire - wound platinum resistance temperature detector elements are fabricated by wrapping a double-strand platinum wire around a glass core and then fusing the exterior to the glass. They are suitable for temperatures from -200℃ to 500℃. The basic values and tolerances of resistance temperature detectors conform to IEC 60751.

Stator winding sensor is mainly installed in the middle of the upper and lower coils between the winding slots of the low and high voltage of motor and generator. Using in the temperature measurement and protection of large motors and wind turbines.

BTD is used in Petroleum, Chemical Industry, Mining, Machinery Industry and other fields. It is used as the sensor to measure the temperature, usually used in conjunction with display instruments, recording instruments and electronic controllers. Directly measuring the media of liquid, vapor, gaseous and solid surface temperature in the range from -200°C to 500°C.

Liquid Level Sensor is applied for the fields of Beverage, Milk, Cosmetics Lithium Battery Injection, and Precision Engineering etc.

Vehicle Water Temperature Sensor is applied for NE vehicles and Industrial Automation, detecting the temperature of the coolant of the generator. When the temperature of coolant overheats, it will give an alarm signal. The sensing part usually is NTC or platinum resistance, depending on different application conditions. This type of product is normally special customized according to the technical requirements.

Economy (Probe) sensors are designed to be easy structure and reliable; configurations to use solutions for handling of various temperature measurement tasks. Assembled with shrink tube, metal sleeve, ceramic sleeve, mainly used in lower temperature ranges from -60℃ to 260℃. Ni, Cu or other resistive materials are available upon request. Also thermocouple, PTC, NTC thermistors, KTY silicon sensors can be used as measuring elements. Normally applying in coil or slot of electric machines, laboratories, testing facilities, air, water, solid media, or hazardous area.

Bearing temperature sensor is applied to various outer case of motors and equipment, detecting the heat generated by the friction of the bearing operation, measuring the temperature in the end shields and windings of high voltage motors. Avoiding motor damage due to the excessive temperature of outer case.

Temperature-Vibration Sensor